ROTIX 3 Axis Nozzle Scanner
- Buy Outright
- Rent to Buy
- Long Term Lease
- Short Term Rental
The ROTIX – 3-Axis Nozzle Scannerfacilitates semi-automated inspection of nozzle welds, with available encoding of the probe skew angle. Featuring a specialized long stroke probe holder, the nozzle scanner employs a chain system for stable inspection on both ferrous and non-ferrous surfaces. The scanner is also capable of limited clearance inspection, requiring just 12.7 cm (5.0 in) between the vessel and flange.
Measure probe distance from the weld.
SLIDER PROBE POSITIONING SYSTEM
Make quick adjustment to the probe distance from the weld without requiring scanner removal. The included encoder ensures precise measurement along the frame bar
Configure chain links to scan diameters of 7.6 cm – 60 cm (3 in – 24 in) with our exclusive chain design.
ENCODED SKEW VERTICAL PROBE HOLDER
An inventive probe holder offering 12.2 cm (4.8 in) of vertical travel as well as an encoded skew measurement. As the probe travels around a weld, constant probe contact with the scan surface is maintained thanks to this unique vertical probe holder. Which also features an encoded skew which measures the degrees in which the probe has been rotated horizontally.
Pipe Range: 7.6 cm – 60 cm (3 in 24 in)
Encoder Resolution: 16.3 counts/mm (414.5 counts/inch)
Y-Axis Encoder Resolution: 161.3 counts/mm (4096.0 counts/inch)
Skew Axis Encoder Resolution: 2.84 counts/deg.
Probe Holding Capacity: 1 wedge
Encoder Cable Length: 5 m (16.4 ft)1
Inspection Surface: Non-ferrous or ferrous materials
Radial Clearance: 38 cm (15 in)2
Vertical Clearance: 12.5 (4.9 in)
SIZE & WEIGHT
Low Profile Link Height: 6.1 cm (2.4 in)
Low Profile Link Width: 8 cm (3.2 in)
Low Profile Link Length: 18.8 cm (7.4 in)
Low Profile Link Weight: 0.53 kg (1.2 lb)
Encoded Skew Vertical Probe Holder Height: 32.2 cm (12.7 in)
Encoded Skew Vertical Probe Holder Width: 11.6 cm (4.6 in)
Encoded Skew Vertical Probe Holder Length: 10.4 cm (4.1 in)
Encoded Skew Vertical Probe Holder Weight: 0.75 kg (1.7 lb)
ENCODED SKEW PROBE HOLDER SPECIFICATIONS
Minimum Wedge Width: 40 mm (1.5 in)
Maximum Wedge Width: 45 mm (1.7 in)
pdf 6 MB
You may also like
The Rotix – CEG011 is a manual chain scanner designed to provide encoded probe position of two Phased Array probes circumstantially around tubes and pipes.
2 phased array wedges, 2 TOFD wedges. The dual pivot frame bar accommodates longitudinal scanning applications.
The Rotix – CEG013 is a manual chain scanner designed to provide encoded probe position of four probes circumferentially around tubes and pipes.