Complex Project? Simple Solution.


Available for:

  • Buy Outright
  • Rent to Buy
  • Long Term Lease
  • Short Term Rental

Probot is a powerful, highly advanced, compact, and light probe pusher system. It is easy to transport and set up, has a small footprint, and offers the robustness required by the industry.

The system is designed with versatility in mind, exceeding the requirements of BoP inspections, while offering the oil and gas and other industries an extraordinary productivity-enhancing tool. By automating probe motion during heat exchanger inspection, the system always yields accurate and reliable data at speeds optimized for the technique. Probot makes one-person inspection a reality — users can benefit from a significant competitive edge with this productionoriented probe pusher. Probot can dramatically and safely increase inspection speed, while maintaining high quality.

Probot is compatible with industry-standard probes and is fully integrated into Eddyfi’s product lineup. The probe pusher system is designed to enhance the operation of our most innovative tubing probes. Configure and control the system with Magnifi, the most advanced multi-technology software for tube inspections. Adding the Ectane test instrument to the mix creates the most powerful heat exchanger inspection system on the market.

To enquire about Probot, or any of our other eddy current inspection equipmentget in touch now or request a quote online.


Weight Drive w/o belts or protective covers: 22.3 kg (49 lb) Drive: 23.6 kg (52 lb) Take-up reel: 6.4 kg (14 lb)

Dimensions (W×H×D) Drive: 307×277×554mm (12.1×10.9×21.8 in) Drive and take-up reel: 361×521×940mm (14.2×20.5×37.0 in)

Operating temperature 0–45 °C (32–113 °F)

IP rating Designed for IP65

Speed range 0–2.5m/s (0–100 in/s) Wide range of speeds to accommodate various inspection techniques

Push force Peak: 445N (100 lbf) Continuous: 245N (55 lbf) Supported poly sizes 9.53mm (3/8 in) 7.94mm (5/16 in) 6.35mm (1/4 in) — optional belt required

Supported probe diameters 7–23mm (0.276–0.906 in)

Spool outer diameter 406.4mm (16 in)

Spool capacity 33.5m (9.53mm tubing) [110 ft (3/8 in tubing)]

Encoder resolution 18.796 counts/mm (477.406 counts/in) AC input voltage 110–120V / 220–240V 50–60Hz

Product Downloads

Probot Brochure & Specifications Sheet
pdf 960 KB

You may also like

The Fastest In-Ditch Pipeline Integrity Solution for Stress-Corrosion Cracking Detection and Depth Measurement. As its other namesakes, this high-resolution probe uses tangential eddy current array (TECA™) technology and is designed for the detection and depth measurement of surface-breaking cracks in carbon steel.

The standard pulsed eddy current array (PECA) probe is specifically engineered to maximize productivity for the detection of corrosion under insulation (CUI) and corrosion under fireproofing (CUF) in pipes, vessels, sphere legs, and more. (*This probe requires the LYFT system)

Head Office

12/55 Erceg Road Yangebup, Western Australia 6164