Complex Project? Simple Solution.

Spyne™

Available for:

  • Buy Outright
  • Rent to Buy
  • Long Term Lease
  • Short Term Rental

Spyne™, an adaptable surface eddy current array (ECA) screening tool, is specifically engineered to maximize productivity for the detection of stress-corrosion cracking (SCC), cracks, subsurface defects, and pitting in various critical components such as high-pressure gas pipes, vessels, tanks, pipelines and more. With a higher PoD than MPI / PT and with its ultrafast capabilities, it paves the way to unprecedented efficiency.

The groundbreaking screening tool makes inspections much faster and more efficient than MT/PT. It can accommodate a range of flexible probes, designed to suit ferritic and non-ferritic alloys,  and be configured to inspect external diameters from 150 mm (6 in) to flat surfaces.

Spyne is capable of a single-pass coverage of 200 mm (8 in) at scan speeds as high as 600 mm/s (24 in/s). The wide coverage not only makes inspections faster than ever, but also minimizes inspection preparation with Grid-As-U-Go™. The wide coverage accessory dramatically reduce gridding times. The powerful automatic detection capabilities of the software also make screening and analysis operations significantly faster. Displaying C-scans has never been this quick, improving the overall productivity of inspections.

  • Very high PoD: leave no crack behind
  • Repeatable and reliable results
  • Minimal surface preparation required; no need to remove coating
  • Data archiving
  • Compatible with a wide variety of flexible-PCB probes,
    coils diameters, and topologies

Contact us to find out more about the Spyne™ or any of our other eddy current test equipment or request a quote online.

Specifications

COVERAGE

200 mm (8 in)

NUMBER OF CHANNELS REQUIRED

128

OUTER DIAMETER RANGE

150 mm (6 in) OD to flat surfaces

SMALLEST DETECTABLE DEFECTS

As small as 2mm (0.080”)L × 1mm (0.040”)D

MAX. MEASURABLE CRACK DEPTH

No depth sizing

SCAN SPEED

Up to 600 mm/s (24 in/s)
*With full data recording

LIFT-OFF TOLERANCE

Up to 3 mm (0.120 in)

 

OTHER FEATURES

  • Grid-As-U-Go™
  • Embedded spring-loaded encoder
  • Pre-calibration/calibration check tool
  • Combined with Magnifi: assisted detection and on-the-spot reporting
  • Control buttons for single operator use
  • Max. operating temperature: 150 °C (300 °F)

Product Downloads

SPYNE Spec Sheet
pdf 396 KB

Head Office

12/55 Erceg Road Yangebup, Western Australia 6164