Back to Belt Alignment Products

Easy-Laser® XT190 Belt Alignment

The Easy-Laser® XT190 is a wireless and digital tool for alignment of sheaves/pulleys. When aligning with the Easy-Laser® XT190 you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels.

Short Term Rental Long Term Lease Rent to Own Buy Outright

WIRELESS AND DIGITAL TOOL FOR ALIGNMENT OF SHEAVES/PULLEYS

When aligning with the Easy-Laser® XT190 you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels. The accuracy of the digital readout means that you can align within prescribed tolerances and rely on the result. Especially transmissions with two or more belts, or wide belts, are highly affected by misalignment, causing large differences in belt tensions and also increased wear and tear on edges.

EASY TO USE

Easy-Laser® BTA is attached in a few seconds magnetically, with the laser transmitter on one of the sheaves and the detector on the other. The program guides the user in mounting the units. The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of offset and both angular values. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout lets you align within prescribed tolerances and rely on the result.

CONNECT TO A DISPLAY UNIT

Using a separate display unit makes it all even easier, as you can read off and follow the adjustment at the precise point on the machine where the adjustment is made. You get adjustment values for both horizontal and vertical directions (shim value), resulting in a more accurate alignment in a shorter time. You can also save the results in the display unit’s internal memory and produce a PDF report.

A COMPLETE SYSTEM CONTAINS

1 Laser transmitter
1 Detector unit
2 Targets
1 Charger (100-240 V AC) with cable
1 USB memory stick with documentation
1 Carrying case

Contact us to find out more about the Easy-Laser® XT190 or any of our other measurement and alignment equipment, or request a quote online.

Product Downloads

Product Brochure

Specification

DETECTOR FOR BELT ALIGNMENT

Name	Wireless detector for belt alignment, XT
Part No.	12-1054
Measurement distance	Up to 3 m [9.8’] between transmitter and detector
Measurement range	Axial offset: ±3 mm [0.12”]. Angular value: ±8°
Display type	Yellow OLED 96×96 pixels
Connection	BT wireless technology
Battery type	Li-Po
Battery operation	5 hours continuously
Material	ABS plastics / Anodized aluminium
Dimensions	WxHxD: 95x95x36 mm [3.7×3.7×1.4”]
Weight	190 g [6.7 oz]

LASER TRANSMITTER FOR BELT ALIGNMENT

Name	Laser transmitter for belt alignment, XT
Part No.	12-0309
Sheave diameters	Ø60 mm [2.5”] and larger
Laser class	2
Laser wavelength	635–670 nm
Beam angle	60°
Accuracy laser plane – Reference plane:	Parallelity: < 0.05°, Offset < 0.2 mm [0.008”]
Battery type	1xR6 (AA) 1.5 V
Battery operation	8 hours continuously
Material	ABS plastics / Hard anodized aluminium
Dimensions	WxHxD: 145x86x30 mm [5.7×3.4×1.2”]
Weight	270 g [9.5 oz]

Request a Quote Add to Quote

Easy-Laser® XT190 Belt Alignment

WIRELESS AND DIGITAL TOOL FOR ALIGNMENT OF SHEAVES/PULLEYS

Related Reading